A very common problem for all dishwashers. If water is not draining from the machine or you are getting a drain error code then it's likely the drain pump has failed or become blocked. We can diagnose this fault, remove the pump and clear any blockages or replace the pump if necessary.
Dirty marks on dishes:
Your dishwasher is not giving you the results it used too? We can test the unit to ensure all of the components are working correctly to ensure correct operation. It may be that the unit has become clogged from daily use, the heating system has broken down, detergent system not operating or the unit not rinsing correctly. We have the expertise to diagnose the problem whether it’s the heater element, air pressure switch or failed wash pump.
Machine constantly running
Machine constantly running? This may be caused by a failed water inlet solenoid, timer or control board. We can check and diagnose the fault and replace the failed components as necessary.
A very common problem with commercial washers. The faults most usually found are a failed inlet valve, split drain or rinse hose or a corroded rinse tank/boiler.
Our technicians carry parts to replace inlet valves and hoses. We can replece your corroded boiler with a new tank made from heavy duty stainless steel to unsure longevity and reliability.
Are you concerned about your customers’ health? Would you like to improve the flavour and nutritional value of your fried product? And would you like to save money doing so? Then read on and take the first step towards a higher quality healthier product that actually can help save you money…
SAVING COSTS, IMPROVING OIL LIFE AND INCREASING EFFICIENCY
Food quality and operating efficiency is improved by cooking in regularly filtered oil. Long oil life can be achieved by frequently filtering the fat and oil inside the deep fryer. This allows the oil to work at greater efficiency for a longer time. This improvement can be associated with increased efficiency; including power cost savings and a longer fry life for the fat or oil.
Several factors that shorten the fry life of the oil include the presence of water, emulsifiers, seasoning, light and detergent.
VARIOUS TYPES OF FATS AND OILS
Different types of oil or fat used to fry foods affect the overall nutritional quality of the finished product. Many of the various types of fats and oils available on the market are not suitable for cooking over long periods of time at high temperatures, as happens in deep-frying.
1) Tallow-based (Beef) Fats - The most commonly used fat due to its cheaper cost and relatively longer fry life. This oil is not recommended due to it’s association with increased heart disease risk.
2) Liquid Vegetable Oils - Whilst most vegetable oils are recommended for cooking, many of them are not suitable for deep-frying. Higher temperatures break down the oil faster and by-products often have an off-flavour and that may also increase heart disease risk.
3) Hardened/Creamed Vegetable Oils - These products may have a longer fry life than their liquid oil equivalents, but the hardening process increase heart disease due to the components added.
Text taken from the Roband electric fryer operating manual
WA Commercial Appliances service and recommend Roband electric fryers.
We at WA Commercial Appliances are concerned and committed to your customers health as well as the well being of your business and equipment.
To keep your Roband fryer in tip top shape Give us a call to arrange a regular check up and service.
We carry all spare parts for Roband Electric Fryers.
For Better Commercial Appliance Service in Perth:
To all our valued customers, please have the following info ready when calling for an emergency breakdown service:
1) Manufacturer Of the Equipment
2) Model #
3) Serial #
4) Be as specific as possible: What is the equipment doing or NOT doing?
5) The best times to work in your kitchen. (Letting us know time restrictions will help us to not interfere with your business as far as practical.)
This information may seem simple and it is. However it is very important to make the service call out as efficient as possible. Point number four may be the most important.
Our vans are stocked quite extensively with all the more common parts such as dishwasher solenoids, thermostats, pumps and elements for about an 85% first time fix rate. That's pretty good!!
If we know exactly what the unit it doing(or not doing), we can plan ahead. Our Service technician may need to get take a non-stock part with us such as a motor or an element that may not be so common. Giving us as much information can help. It will save you time, money and most important, we can get that Dishwasher or Combi oven up and running so the weekend can be saved!
Here at WA Commercial Appliances, we want our customers to have a satisfactory experience from the moment we answer the phone to the moment our service technician gets finished and you get back to business as usual. We are here to keep you Calm, "Cool", and "Cooking"!
This relates to the operation and care of Washtech dishwashers and glasswasher, Eswood dishwashers and glasswashers, Hobart dishwashers and glasswashers as well as most other brands of commercial washer.
Read the Operator Manual.
An adequate supply of water at the correct temperature and pressure is essential for effective operation of your Commercial Dishwasher. Refer installation instructions for details. Drain hose outlet height is important on some models. Always install on a sound self-draining floor.
Water softening is recommended in hard water areas - especially for efficient glasswashing.
Pre-scraping of dishes is required by hygiene regulations. The best method is to pre-rinse with a pre-rinse spray unit - or alternatively by scraping and dunking in water before placing dishes into the dishwasher..
Pre-soak cutlery in warm water, preferably containing cutlery pre-soak compound - refer to your chemical supplier.
Do not overfill cutlery containers. Cutlery should be loose with handles down. Sort after washing rather than before. Cutlery of only one type nests together and obscures wash water.
Do not overload racks, minimize the overlap of crockery. Cycle times are short and water consumption per cycle low - so there is no advantage in overloading racks.
For multi-cycle commercial dishwashers use the longest cycle whenever possible. Note that water
consumption does not increase with longer cycles. Only choose shorter, faster
cycles when necessary.
Use of correct type and quantity of low foaming detergent is essential to the performance of your commercial dishwasher. Ask a professional chemical supplier to recommend the best types and concentrations of detergent, rinse fluid and cutlery soak for your situation. Note that detergents are hazardous. Poorly formulated detergents, particularly those containing chlorine, can shorten the life of dispensing systems and the dishwasher itself.
Dishwashing Procedures for best results:
Single tank commercial dishwashers do not have a drying cycle. However, the machines do rinse at high temperatures which promote fast drying particularly when drying agents are used. We recommend prompt removal of the rack from the machine - leave the rack on the bench for 2 to 3 minutes before emptying. This time will be reduced with correct use of drying agent (rinse fluid) which reduces water surface tension and allows water to drain quickly from washware.
For advice on drying agents and injectors refer to your chemical supplier.
It is essential that the machine is drained and cleaned at the end of each day. Drain the machine then remove, clean and replace filters as per the operating
instructions. Regularly check the wash and rinse jets and clean them if necessary See below.
Remove scrap trays and wash pump inlet filter where fitted, and rinse or brush clean.
Remove wash and rinse arms by undoing the central thumbscrews. If fitted, remove the end caps from the wash arms and the rinse arms and flush the arms with water and/or use a toothpick or paperclip to clear jets.
Regular servicing is essential for optimum performance and
long machine life. Maintenance is recommended at least
once every six months – especially when chemical injectors
Please contact WA Commercial Appliances
to organize regular servicing of the dishwasher - or discuss a
Preventative Maintenance Agreement.
Note: these are general instructions to assist in getting the best performance from your commercial dishwasher –
some comments may not apply to every unit.
Dishwasher Preventative Maintenance.
All Commercial catering equipment, particularly commercial dishwashers require regular maintenance by a qualified dishwasher service technician. A Preventative Maintenance Agreement from WA Commercial Appliances makes it easy to keep your dishwasher and glasswasher etc in good shape.
Reasons to Get a Preventative Maintenance Contract?
Glasswashers and undercounter machines. $220 + GST per quarter.
Medium sized passthrough machines. $265 + GST per quarter.
Pot washers and conveyor washers. $350 + GST per quarter.
Note: prices do not include any replacement parts or labour required to carry out major repairs other than
** Discount applicable for multiple machines.**
Dishwasher repair in Perth
Dishwasher service in Perth
Glass Washer Repairs in Perth.
Qualified and experienced glasswasher service technicians.
Glasswasher in need of some attention?...?
Give us a call now on (08) 615 47938 All commercial glasswashers require regular servicing to ensure reliable efficient operation. The failure of a Glass washer is always inconvenient and very disruptive to service... and usually occurs when you need it most!...
For Glasswasher service to ensure good reliable operation or glasswasher repairs , Give WA Commercial Appliances a call (08) 615 47938
Glass washers can be picked up and returned to our workshop for repair by our qualified service tcnicians or alternatively we can carry out repairs on site. whichever proves to be most convenient for yourselves.
Other Services we provide
Dishwasher not running?...Need an emergency dishwasher repair in Perth?
WA Commercial Appliances are your go to Experts for Commercial Dishwasher and Glasswasher repair in Perth.
WA Commercial Appliances are able to provide Service and breakdown repair to all makes of commercial dishwasher and commercial glasswasher.
Some commercial dishwashers are not particularly complex devices, however they do contain dangerous voltages inside and under no circumstances should the covers be removed, or work be carried out by anyone other than a qualified repair technician.
Dishwashers and Glass washers will fail for a number of reasons, faulty solenoid, heating element not working, Faulty pump or thermostat. etc. WA Commercial Appliances carry a wide range of these spare parts to get you back in business ASAP.
A quick check of a couple of things could save you the cost of an emergency call out.
Quite often it is possible to save yourself the cost of calling out a dishwasher repair technician without resorting to dismantling or the removal of covers.
First of all check the obvious...
Our competitive rates, fully qualified, experienced technicians and well stocked service vans ensure we can provide a prompt, efficient and very professional service.
Our aim is to repair your equipment on the first visit, reducing down time and cost. We understand the importance of minimizing down time and getting you back in business, Fast! To book a dishwasher repair technician please call now on (08) 615 47938
Brands We Service: These are just some of the brands we service: Hobart, Norris, Washtech, Eswood, Comenda, Classeq, Madison and many more. We carry a range of parts for these machines
For Commercial Dishwasher Repairs Perth or Commercial Glasswasher Repairs Perth, call us on (08) 615 47938 now to book your emergency repair.
Note: All images on this website are the sole property of WA Commercial Appliances Australia and must not be used, copied, shared or published without express permission of WA Commercial Appliances Australia.
Proudly powered by Weebly